TrashBot

trash

The TrashBot is the Ultimate Robotic Garbage & Trash Collecting System to Empty the Trash Bins everywhere in the facilities on regular basis without much manpower or delay.

By The Ultrasonic label sensors which will be amounted to the trash bin. And as soon as the trash inside the bin has reached the pre-established label level, the sensor will send a signal to the TrashBot’s Program with details about a full trash bin and its location with the shortest route to reach the desired area as soon as possible. TrashBot is specialized with 3D vision system recognizes the bin, laser scanner and Ultrasound Sensors for obstacle avoidance if there is anything around the Bin. When the TrashBot arrives the goal and by using a Robotic arm provided with special kind of grippers could carry till 15 kilograms, it lifts the plastic bag from the trash bin then throw it inside the TrashBot tank which is corresponding the health conditions.

Replace the full trash plastic paper with an empty one, and make this process repeatedly as soon as the trash bin is full, in this case we can reduce the delay timing and all the accumulated trash by using an artificial intelligence system. Provided with very unique solar panels roof to act as an electric vehicle powered completely or significantly by direct solar energy. Mobility between floors by distinguishing the elevators place, and also it could move from one floor to another one by a special vehicle or a special equipment as the facility requires.

Specifications

  • Controller: Digi Robotics Navigation System
  • System: KR16
  • Dimension: Length*width*height: 3880 * 1480 * 1950 (mm)
  • Max. Driving Speed: 30 Km/h
  • Weight: 1000 Kg
  • Payload Weight: 400 Kg
  • Max. Charging Time:  8 to 10 Hours
  • Continuous Running Time: 6 to 8 hours (Normal Temperature)
  • Power: 48 V Battery, DC, 200 Ah
  • Turning Radius: Minimum Turning Radius 6m.
  • Climbing Ability: <20%
  • Max. Braking distance at a speed of 20Km/h: <4m
  • Charging Method: Solar panel sheet for the Outdoor use and Electrical Charging for the Indoor use.

FloorBot

floor

FloorBot has been designed to dry and damp mops all hard-surface floors, keeping dirt and dust under control automatically, in addition to mop quickly and efficiently, systematically covering the entire floor in a single pass.

FloorBot by its precision sensors system tracks where the clean areas or no clean areas are, so it doesn’t miss a spot. Programmable as the facility requires, it can cleans the full area by one mopping round or two or three times so it depends on the software and the defined timing for each mopping round. To avoid all the obstacles or the passes-by and by considering all the safety issues, we amounted A specialized sensor system emit pulses, make the FloorBot stops immediately and then the control and maneuvering unit start measuring the right corner and change the direction of the wheels and then move the FloorBot,  with extra feature  of calculating object distances. The system in turns warns the Program by sending an alarm signal to prepare to maneuver around the object.

Urgent Conditions and call for duty feature, FloorBot is pre-programmed to respond for an urgent conditions and calls. All The Time in Malls, Airports or any public area someone by mistake splits his drink, so the floor will be wet till the supervisor send a duty alarm to the nearest FloorBot to an urgent task, in this case the Connected FloorBot will run immediately by its local GPS System to the area where the wet floor is. Will Go directly and make its task and clean the area there, after that by the saved last location app will go back again to its previous site and automatically continue its tracking to the pre-programmed floor plan.

Specifications

  • Controller: Digi Robotics Navigation System
  • Dimension: Length*width*height: 2150 * 1750 * 2020 (mm)
  • Max. Driving Speed: 8 Km/h
  • Working Speed: 7 Km/h
  • Weight: 690 Kg
  • Max. Charging Time:  4 hours
  • Continuous Running Time: 6 to 8 hours (Normal Temperature)
  • Power: 36 V Battery
  • Turning Radius: 1200mm
  • Climbing Ability: <20%
  • Cleaning Width:

Main Brush + Double inner brushes                                                                                      1350mm

Main Brush + Double inner brushes + Side outer brush                                                    1550mm

Main Brush + Double inner brushes +Double outer brushes                                            1750mm

  • Cleaning Area: 10000 m²/h
  • Volume of waste container: 150 L
  • Charging Method: Solar panel sheet for the Outdoor use and Electrical Charging for the Indoor use.

GrassBot

grass

GrassBot is a high technology intelligence product. It has an intelligent system memory system and automated navigation system. Additionally, it has the functions of auto mowing, auto recharging, auto bonds avoidance, auto climbing the slope, rain sensor.

During operation, it has the technical features of low noise, small power consumption and high intelligence. GPS System to detect the whole surrounding area to cut the grass around then go on depth. Detects obstacles before making contact with them, this makes it safer for children and pets.

Subarea setting: It can separate a big area into small areas to cut, it save more time to cut a big lawn with less time.

Solutions

GrassBot is a best way to make your lawn be green and perfectly cut. Two cutting modes go straight or go circle will make you safe time. Eco-friendly and fast GrassBot can be used for:

  • Public Parks
  • Private Villas
  • Public areas ( greenery along highways and roads)

GrassBot will not ask you for Visa it’s your high-tech solution for a smart Home and smart Public Park.

Specifications

  • Overall Dimensions: 2290 x 764 x 1300 [mm]
  • Working width: 1300 [mm]
  • Working capacity: 3000 sqm/hour
  • Max Working depth: 15 [cm]
  • Ground Clearance: 350 [mm]
  • Weight: 500 [Kg]
  • Frame: Stainless steel, aluminium
  • Battery Pack Weight: 120 [Kg]
  • Tracks treads: 317 [mm]
  • Tracks length: 1061 [mm]
  • Locomotion system: 2×2 All Terrain Tracks
  • Type: Beach Cleaning Machine
  • Max Payload in rough conditions: 350 [Kg]
  • Max Speed: 2.7 [km/h]
  • Climb capacity: < 20°
  • Traversal capacity: < 20°
  • Battery Pack: 2 x 12 [V], 200 [Ah] Sealed AGM Battery
  • Total Power: 4800 [W]
  • Standard battery Autonomy: 2-3 [Hours]
  • Heavy-duty battery Autonomy: 1.5 [Hours]
  • Full Charge Time: 8 [Hours]
  • Remote RC Control: Futaba RC Transmitter, 8CH, max range 150 meters

BeachBot

Beach

BeachBot Sand Cleaner is very easy to control and drive with no effort to make any beach a wonderful place for leisure!

The easy-to-use radio controller will help you to switch ON/OFF the mechanical sifter, to trigger the discharge process and to set the working depth and the working unit height without any effort. By using the joystick, it is possible to move the machine in all the directions with an incredible precision also at long distance. The self-unloading rubbish system, the possibility to remotely set the working-depth and the working unit height any time during the normal operations allow to work in comfort by reducing human efforts and stress.

It is silent and eco-friendly because BeachBot Cleaner is totally electrically driven and does not use internal combustion engines or Hydraulic systems; it uses electric linear Motors to configure the working-depth parameter and to execute rubbish unloading operations. BeachBot  is designed to provide the best performance in any situation, it can operate with precision in wet and dry sandy terrains,  and mud without problems by minimizing slips. Flexible tracks trades enabling the robot to tackle various obstacles such as rocks, roots, fallen debris, creek and climbs.

Solutions

  • BeachBot can carry up to 1000Kg of items it found during cleaning.
  • BeachBot covers up to 150 meters( 500 ft) in few hours
  • Best solutions that BeachBot provides are smiles on face of happy tourist that enjoy clean sand.Specifications
    • Overall Dimensions: 2290 x 764 x 1300 [mm]
    • Working width: 1300 [mm]
    • Working capacity: 3000 sqm/hour
    • Max Working depth: 15 [cm]
    • Ground Clearance: 350 [mm]
    • Weight: 500 [Kg]
    • Frame: Stainless steel, aluminium
    • Battery Pack Weight: 120 [Kg]
    • Tracks treads: 317 [mm]
    • Tracks length: 1061 [mm]
    • Locomotion system: 2×2 All Terrain Tracks
    • Type: Beach Cleaning Machine
    • Max Payload in rough conditions: 350 [Kg]
    • Max Speed: 2.7 [km/h]
    • Climb capacity: < 20°
    • Traversal capacity: < 20°
    • Battery Pack: 2 x 12 [V], 200 [Ah] Sealed AGM Battery
    • Total Power: 4800 [W]
    • Standard battery Autonomy: 2-3 [Hours]
    • Heavy-duty battery Autonomy: 1.5 [Hours]
    • Full Charge Time: 8 [Hours]
    • Remote RC Control: Futaba RC Transmitter, 8CH, max range 150 meters